HD3 First Look

  

Home Up
4th April 2005

HyperOS Systems Ltd Release First Production Run Info & Specifications For The HD3"A"
Revision A goes into production on Wednesday 6th April 2005 and can take 6 x 1GB DDR1 sticks. These sticks must be Registered ECC and must employ 8 bit wide memory chips. At present one can only get 1GB sticks or less in this configuration.

Samsung, Corsair, Kingston, Micron, Infineon all make such sticks (Crucial do not). HyperOS will supply the part numbers of all approved 1GB sticks for customer convenience by the time HD3 starts shipping. HD3 Revision A will only take 6GB of ram. DDR1 sticks should not be mixed, all sticks should be are from the same Manufacturer.

IOMETER test results are on the pre-production HD3 board and FOR comparison the same tests on a SATA drive (MAXTOR DIAMONDMAX +9, 6Y120M0, 120GB, 7200 rpm, 8 MB cache).
 

Below are the IOMETER graphic results...
 
HD3 vs. Maxtor WEBSERVER Test
       
HD3 vs. Maxtor Copy Test
       
HD3 vs. Maxtor CLUSTER TRANSACTION PROCESSING Test.
       
HD3 vs. Maxtor FILESERVER Test
       
Please note, all the info, images and test data are direct from HyperOS Systems Ltd and have NOT been certified by ourselves. Once we get our hands on a HD3 we will post our own test results.
Posted 4th April 2005      
Last Updated 02/09/2008
Use of this website and its forums plus any information contained therein is at your own risk.
© HyperOSForum.Co.Uk 1995 - 2007 All Rights Reserved.